Serving the Grand Rapids area  ·  (616) 254-0604  ·  Open Mon-Sun 7am-7pm
📞 (616) 254-0604 Free Quote

Metal Roofing in Coopersville, MI (49404) · Local Professionals

Grand Rapids Metal Roofing · Fast response in Coopersville and the Grand Rapids area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+322Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Coopersville is a farm town where the old and the new sit side by side: 1800s farmhouses with shingle roofs that have seen a hundred winters, and newer builds on the edge of town with acreage and outbuildings. If you live off 68th Avenue or near the Coopersville & Marne Railway, you know the mix. We do too.

Homeowners in Coopersville (49404) call Grand Rapids Metal Roofing because we understand the specific challenges here: lake-effect snow that piles up on low-slope porch roofs, ice dams that form at cold eaves, and the constant freeze-thaw cycle that works on fasteners and seams. We are based in Grand Rapids and serve Coopersville and the surrounding areas, and we bring the same straightforward approach to every job, whether it is a ranch house near the high school or a pole barn out on a gravel road.

Metal Roofing in Coopersville (49404)

Coopersville sits in the fruit belt, and the terrain tells the story: flat to gently rolling farmland, sand and clay soils, and a mix of mature windbreaks and open fields. That means two things for roofing. First, wind has a clear run at exposed roofs on the edge of town, so fastening patterns and panel attachment matter more than they do in a sheltered subdivision. Second, older barns and farmhouses often have roof pitches that were built for shingles, not metal, and we have to assess whether a retrofit over existing shingles makes sense or if a tear-off is the better call. We also see a lot of corrugated and ribbed panel roofs on shops and barns that just need re-fastening or screw replacement rather than a full replacement.

Our team has worked on everything from Victorian-era homes near the downtown historic district to 1970s ranches and newer construction. We know how to handle the tight access on some of the older lots near the Coopersville Area District Library and how to coordinate with the Coopersville city offices when a permit is needed. We are fully insured with general liability and workers' compensation, and we treat every property like it is our own.

Our services in Coopersville

How a Job Works in Coopersville

Step 1: You call us at (616) 254-0604 or fill out our contact form. We schedule a free on-site assessment at a time that works for you, including evenings if needed. We walk the roof, check the attic and flashing, and talk through your options, whether that is a repair, a replacement, or a retrofit over existing shingles. You get a written estimate with clear pricing before any work begins.

Step 2: Once you approve, we pull the necessary permits with the City of Coopersville (requirements vary, so we verify with the local building department). We order materials and schedule the work. On the day of installation, our crew arrives early, protects your landscaping and driveway, and works efficiently. If your property has a tight driveway or a steep grade, we plan for that in advance, using the right equipment and staging areas.

Step 3: When the job is done, we do a thorough cleanup, magnet sweep for nails, and a final walkthrough with you. We do not leave until you are satisfied and understand the care and maintenance of your new metal roof.

Pricing for metal roofing in Coopersville depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot. For smaller jobs, metal roof repair starts at $450, and screw replacement and re-fastening starts at $750. Corrugated and ribbed panel roofing, common on barns and shops, starts at $5.50 per square foot. We also offer free estimates for inspections and storm damage assessments. Call us at (616) 254-0604 to get a precise quote for your Coopersville property.

My barn on the edge of Coopersville has an old corrugated metal roof with leaking screws. Can you just replace the screws, or do I need a whole new roof?
In many cases, we can replace the screws and re-fasten the panels if the metal itself is still sound. We inspect for rust, panel distortion, and sealant condition. If the panels are deteriorated, we will give you options for a new corrugated or ribbed panel roof, which is a cost-effective choice for outbuildings.
A storm just blew through Coopersville and lifted some panels on my roof. How quickly can you respond?
We offer free storm damage inspections and prioritize emergency repairs. Call us at (616) 254-0604 and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp or secure the area to prevent further damage and provide a detailed estimate for repairs.
What does a typical metal roof replacement cost for a 1,500-square-foot ranch house in Coopersville?
For a 1,500-square-foot ranch with a simple gable roof, a metal roof replacement typically ranges from $9,000 to $15,000, depending on the material (corrugated vs. standing seam) and whether we tear off the old shingles. Access, roof pitch, and flashing details can affect the price. We provide a free estimate with exact figures.
Do I need a permit to replace my roof in Coopersville, and can you help with that?
Yes, the City of Coopersville generally requires a permit for roof replacement. Requirements can vary, so we verify with the local building department before starting. We handle the permit application and inspections as part of our service, so you do not have to worry about the paperwork.
My neighbor's tree branches hang over my roof. Can I trim them, and does my HOA need to approve a metal roof?
You have the right to trim branches that overhang your property line, but it is best to talk with your neighbor first. For HOA approval, many subdivisions in the Coopersville area have design guidelines. We can provide material samples and documentation to help you get approval before you commit to a metal roof.
Are you fully insured for work on my Coopersville property?
Yes, we carry general liability insurance and workers' compensation coverage for all our employees. You can have peace of mind knowing your property and our crew are protected.
What maintenance does a metal roof need in Coopersville's climate?
Metal roofs are low maintenance, but in our lake-effect snow climate, we recommend annual inspections, especially after winter. Check for loose fasteners, debris in valleys, and snow guard condition. We offer maintenance plans and can install snow guards to prevent ice dams and sliding snow.
Why choose us?

Trusted professionals in Grand Rapids

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Grand Rapids

All your work handled by qualified professionals in Grand Rapids

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

322+ Verified Client Reviews in Grand Rapids

⭐⭐⭐⭐⭐ 4.9/5 · 322 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Grand Rapids · Response within 24h · No commitment · ☎ (616) 254-0604

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Grand Rapids ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm