Serving the Grand Rapids area  ·  (616) 254-0604  ·  Open Mon-Sun 7am-7pm
📞 (616) 254-0604 Free Quote

Metal Roofing in Kentwood, MI (49508) · Local Professionals

Grand Rapids Metal Roofing · Fast response in Kentwood and the Grand Rapids area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+322Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Kentwood is a city of practical, well-kept neighborhoods where the brick ranches and two-story subdivisions built between the 1960s and 2000s are now hitting the age where shingles start to fail. If you live near Kentwood City Hall or along the 28th Street corridor, you know the look: mature maples, modest lots, and roofs that have seen a lot of West Michigan winters.

Homeowners in 49508 call Grand Rapids Metal Roofing because we understand the specific wear patterns here, from ice dams at the eaves to wind-lifted panels after a summer storm. We are based in Grand Rapids and know these streets, from the quiet blocks off Eastern Avenue to the busy stretches near the Kentwood Plaza.

Metal Roofing in Kentwood (49508)

Kentwood sits on mostly flat to gently rolling ground with a mix of sand and clay soils, which can affect drainage and how we handle runoff from your roof. Many homes here have mature trees that drop leaves and limbs, and the freeze-thaw cycles in winter are hard on asphalt shingles. That is why more homeowners are switching to metal shingle roofing or standing seam, which shed snow and ice better and last decades longer. We also see a lot of storm and wind damage repair calls after the straight-line winds that roll through Kent County.

Our team has worked on homes throughout Kentwood and the surrounding Grand Rapids area, from the 1960s brick ranches near Pinewood Park to the newer subdivisions off 44th Street. We know the local building department and what it takes to get a roof permitted and inspected properly.

Our services in Kentwood

How a Job Works in Kentwood

Step 1: You call us at (616) 254-0604 or request a free estimate online. We schedule an on-site assessment at your Kentwood home, usually within a few days, and we inspect your roof, attic, and flashing. We give you a written estimate with options, including metal shingle, standing seam, or a retrofit over your existing shingles if your roof qualifies.

Step 2: Once you approve, we pull the necessary permits from the City of Kentwood and schedule the work. Many Kentwood lots have tight side yards and mature landscaping, so we plan material delivery and staging carefully. If your home is in an HOA, we help you get the color and profile approved before we order materials.

Step 3: After installation, we do a full cleanup, including magnet sweeps for nails, and walk the property with you to make sure you are satisfied. We leave your yard and driveway as clean as we found them.

Metal roofing in Kentwood is priced by the square foot, and most homeowners want a ballpark before they commit. For a typical 1,500 to 2,000 square foot ranch, metal shingle roofing starts around $9 per square foot, while standing seam starts around $10 per square foot. A metal roof replacement starts around $9 per square foot, and a retrofit over existing shingles starts around $7 per square foot if your roof has only one layer. Smaller repairs, like fixing a leak or replacing screws, start around $450. The final price depends on roof size, pitch, access, the condition of your existing roof, and how soon you need the work done. Call us at (616) 254-0604 for a free estimate tailored to your Kentwood home.

My Kentwood ranch was built in the 1970s and still has the original shingles. Is metal shingle roofing a good fit for this style of home?
Yes, metal shingle roofing is a popular choice for the brick ranches and Cape Cods common in Kentwood. It gives you the look of shingles with the durability of steel, and it handles the freeze-thaw cycles here much better than asphalt. We can match the profile to your home's style and help you choose a color that fits the neighborhood.
A storm just blew through Kentwood and lifted some panels on my roof. How quickly can you respond?
We offer free inspections for storm and wind damage and prioritize emergency repairs. Call us at (616) 254-0604 and we will schedule a visit as soon as possible, usually within 24 to 48 hours for active leaks or dangerous conditions. We document the damage for your insurance claim and make temporary repairs if needed.
What is the typical cost to replace a roof on a 1,800 square foot home in Kentwood with metal?
For a home that size, most metal roof replacements fall between $14,000 and $22,000 depending on the material and complexity. Metal shingle and stone-coated steel start around $9 per square foot, while standing seam starts around $10 per square foot. We give you a detailed written estimate after inspecting your roof.
Do I need a permit from the City of Kentwood to install a metal roof?
Yes, a roofing permit is typically required for a full replacement or re-roof in Kentwood. The rules and fees are set by the city, and we handle the permitting process for you. You can check the City of Kentwood website for general information, but we recommend calling the building department directly to confirm current requirements for your project.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues on their side. What should I do?
We can adjust gutter placement and downspouts to direct water away from the property line. If you are in an HOA, we also help you get approval for the roof color and style before installation. It is always a good idea to talk with your neighbor early so there are no surprises.
Are you insured for roofing work in Kentwood?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Kentwood's climate?
Metal roofs are low maintenance, but we recommend an annual inspection, especially after winter. Check for loose screws, debris in valleys, and snow guards before the first heavy snow. We offer maintenance plans and can inspect your roof for free to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Grand Rapids

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Grand Rapids

All your work handled by qualified professionals in Grand Rapids

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

322+ Verified Client Reviews in Grand Rapids

⭐⭐⭐⭐⭐ 4.9/5 · 322 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Grand Rapids · Response within 24h · No commitment · ☎ (616) 254-0604

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Grand Rapids ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm