Serving the Grand Rapids area  ·  (616) 254-0604  ·  Open Mon-Sun 7am-7pm
📞 (616) 254-0604 Free Quote

Metal Roofing in Wyoming, MI (49519) · Local Professionals

Grand Rapids Metal Roofing · Fast response in Wyoming and the Grand Rapids area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+322Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Wyoming, Michigan is a city of brick ranches and tidy bungalows, most of them built between the 1950s and 1970s, with the kind of wide, tree-lined streets you find west of US-131 and south of 28th Street. If you live in 49519, you already know the look: low-pitch roofs, original shingles that have seen decades of lake-effect snow, and gutters that take a beating every January.

Homeowners here call Grand Rapids Metal Roofing because we understand what that housing stock goes through. The freeze-thaw cycle in this part of Kent County is relentless, and it wears out asphalt shingles faster than most folks expect. Whether you are near Wyoming High School or over by Rogers Plaza, we can tell you straight whether a repair will hold or if it is time to look at metal.

Metal Roofing in Wyoming (49519)

Most of Wyoming's residential streets were laid out in the postwar boom, so you get modest lots with mature maples and oaks, detached garages, and driveways that can be tight for a full crew and a delivery truck. The ground here is a mix of sand and clay, which drains quickly in some spots and holds water in others, so we pay attention to where downspouts discharge and how the grade runs away from the foundation. Roof pitches on these ranches and bungalows are often lower than what you see on newer two-stories, which changes how we handle panel overlap and snow load. Ice dams at the cold eaves are the number one failure we see, especially on homes with little or no attic ventilation.

Our team has worked on everything from straightforward re-roofs on 60-year-old ranches to standing seam installations on newer builds near the Wyoming-Kentwood border. We know the local inspectors, we know how to stage materials on a narrow driveway without blocking the sidewalk, and we know which panel profiles and colors tend to pass HOA review in the subdivisions off Byron Center Avenue and Clyde Park Avenue.

Our services in Wyoming

How a Job Works in Wyoming

Step 1: You call us at (616) 254-0604 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and we walk the roof with you. We check the decking, flashing, ventilation, and existing layers, and we give you a written scope with pricing before you commit to anything. No pressure, no surprises.

Step 2: Once you approve the quote, we pull the permits through the City of Wyoming and schedule the work. On tight lots, we stage materials in the driveway and use a roll-off container placed to keep the street clear. If your home is in an HOA, we handle the color and profile submittal so you do not have to chase signatures. Most residential re-roofs take two to four days, weather permitting.

Step 3: We clean the site daily and do a magnet sweep for nails at the end of every day. On the final walkthrough, we show you the finished work, confirm the flashing and vents are sealed, and make sure your gutters are clear. We leave your property clean, and we do not consider the job done until you have signed off.

Pricing in Wyoming depends on the size and pitch of your roof, how many layers are already there, and how accessible the property is. For a typical ranch around 1,500 square feet, metal roof installation starts at about $8 per square foot, and a metal roof over existing shingles starts at $7 per square foot. Standing seam runs from $10 per square foot, and a full replacement starts at $9 per square foot. Smaller jobs like leak repair start at $450, and screw replacement or re-fastening starts at $750. We always provide a free estimate with a clear breakdown, so call (616) 254-0604 to get started.

My ranch off 28th Street has original 1970s shingles and I get ice dams every winter. Will a metal roof over shingles solve that?
A metal roof over shingles can help, but ice dams are usually a ventilation and insulation issue, not just a roofing material issue. We inspect your attic ventilation and insulation levels first. If those are adequate, a retrofit with proper underlayment and ice-and-water shield at the eaves can reduce the problem significantly. We will tell you honestly if the retrofit makes sense or if a full tear-off is the better path.
A storm just blew through Wyoming and lifted some panels on my garage roof. How fast can you get out?
We prioritize storm and wind damage calls in Wyoming and the surrounding area. Call us at (616) 254-0604 and we will schedule a free inspection, usually within 24 to 48 hours depending on call volume. If there is an active leak, we can tarp the area to prevent further damage while we prepare a repair estimate.
What does a typical metal roof cost for a 1,200 square foot ranch in 49519?
For a 1,200 square foot ranch with a simple gable roof, you are generally looking at $9,000 to $14,000 for a full replacement, depending on panel type, tear-off, and flashing details. A metal roof over shingles might run $7,000 to $11,000. These are ballpark figures. We give you an exact number after a free on-site assessment.
Do I need a permit from the city for a metal roof in Wyoming?
Yes, a roofing permit is commonly required for a full replacement or re-roof in Wyoming, and the requirements can vary based on the scope of work. We handle the permit application and inspections as part of the job. You can also verify current rules directly with the City of Wyoming through the official city website at https://www.wyomingmi.gov/.
My neighbor's tree limbs hang over my roof and my HOA has rules about roof color. Can you help with both?
We can coordinate with your HOA on color and panel profile approval before ordering materials, which saves you time and avoids rejected submittals. For overhanging limbs, that is a property-line matter between you and your neighbor, but we can trim back limbs that interfere with our work with your permission and dispose of the debris.
Are you insured for work on my Wyoming property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Wyoming's climate?
Metal roofs are low maintenance, but in our freeze-thaw climate we recommend an annual inspection, especially after winter. Check fasteners for backing out, clear debris from valleys and gutters, and make sure snow guards are secure before the first heavy snowfall. We offer free estimates for inspections and can set up a maintenance plan if you want us to handle it.
Why choose us?

Trusted professionals in Grand Rapids

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Grand Rapids

All your work handled by qualified professionals in Grand Rapids

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

322+ Verified Client Reviews in Grand Rapids

⭐⭐⭐⭐⭐ 4.9/5 · 322 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Grand Rapids · Response within 24h · No commitment · ☎ (616) 254-0604

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Grand Rapids ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm